Skip to main content

FEULING PARTS Oil Pump with Cam Plate – HP+® – Oil Cooled – M8

$ 829.95

In stock

Oil Pump with Cam Plate – HP+® – Oil Cooled – M8

Part #: 09251255

FEULING PARTS quality guaranteed.

Available for ship to store or drop ship.


Free Shipping on New Part orders over $100

FEULING PARTS Oil Pump with Cam Plate – HP+® – Oil Cooled – M8

Additional information

Weight 4.61 lbs
Part Number

09251255

Punctuated Part Number

0925-1255

Vendor Part Number

7196

Vendor Punctuated Part Number

7196

Commodity Code

0932

Commodity Group

ENGINE GROUP

Commodity Type

OIL/WATER PUMPS & PARTS

Product Description

FEULING PARTS Oil Pump with Cam Plate – HP+® – Oil Cooled – M8

Key Features

  • Increase oil pressure, oil volume, engine oil flow and return oil scavenging
  • Quieter and smoother engine operation
  • Engine temperatures run 15°-25° cooler
  • Oil temperatures run 15°-30° cooler
  • 10-30 lbs more psi of oil pressure
  • Reduces wet sumping, blow by and oily air cleaners
  • Test results show 2 horsepower gain and 2 ft/lbs of torque gain to the rear wheel on M-Eight
  • Includes a billet 6061 aluminum high-volume oil pump and FEULING® High Flow billet camplate made from 7075 aluminum; which is 50% harder and stronger than the factory or FEULING® OE+ camplates
  • Increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil portholes throughout the camplate to the portholes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings
  • Oil pumps are bench-tested; the relief valve is seated and sealed to a minimum of 30 psi with full pop-off at 55-60 psi
  • Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function
  • FEULING® oil pump and camplate combination eliminates common pressure and scavenge issues associated with the factory oiling systems
  • FEULING® M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal
  • Made in the USA
  • FEULING® test results show as much as 50% reduction of engine sump oil level.
  • Optional Camplate/oil pump fastener kit PART #2401-0993 available separately.
  • M-Eight oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.

Technical Specifications

  • Weight: 4.61 lbs
  • Supplier Number: 7196
  • Unit of Measure: Kit

Current Warehouse Inventory

Stock by Location:

  • Janesville, WI: 16 units
  • Batavia, NY: 0 units
  • Dallas, TX: 9 units
  • Fresno, CA: 0 units
  • Reno, NV: 6 units
  • Asheville, NC: 13 units
  • National: 20 units

Total Available: 64 units

Inventory Last Checked: December 4, 2025 at 1:00 AM UTC

Thank you for Shopping at Knobtown Cycle!

When you shop with us, you’re not just buying motorcycle parts — you’re supporting a small, family-run business rooted right here in the heartland of America. Every order helps us keep riders on the road and fuels our passion for serving the motorcycle community.
From all of us at Knobtown Cycle, thank you for choosing local and riding with us.

Kit Fox – Owner Knobtown Cycle

Product Reviews

Reviews

There are no reviews yet.

Be the first to review “FEULING PARTS Oil Pump with Cam Plate – HP+® – Oil Cooled – M8”

Your email address will not be published. Required fields are marked *

Need help with installation?  Our Service Department based in Kansas City, Missouri is here for you.  Fill out a Service Request and lets get you rolling!